All Central heating systems are prone to failure through the formation of lime scale, corrosion and bacteria, resulting in poor circulation, radiator cold spots, boiler noise and pin holing of radiators.
 |
| |
| All Gas Care (UK) Engineers have been fully trained in the use of the Sentinel Jetflush Systems and are Approved Operators. |
|
Test kit |
Prevention is always better than cure, so keep your system in top condition by asking Gas Care (UK) Engineers to "Jetflush"your system |
|
Lime scale Buildup |
|
Build up of lime scale can occur in the primary system heat exchanger, hot water cylinder,and showerheads etc. This can result in a loss in efficiency and failure. |
Radiator Pin holing |
A wet central heating system suddenly starts living up to its name. But you do not have the time or the means to effect a permanent repair |
|
| Microbiological Buildup |
|
Often tucked away from site in the loft a water tank can easily be forgotten.The presence of sludge, scale and organic material can provide favorable conditions for the growth of dangerous bacteria. |
| Radiator Cold Spots |
Even when the boiler appears to be functioning efficiently and other radiators in the system maintain the required temperature, one radiator is cold at the bottom yet warm from about half way up |
 |
| Noisy Boilers |
|
A common fault which starts as kettling, then develops into unacceptable banging noises which can be heard throughout the house. |
|
|
